Pneumatic 80 Ton Capacity Hydraulic Floor Jack
|FOB Price:||US $200-450 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $200-450/ Piece|
|Production Capacity:||100000 Sets/Year|
|Payment Terms:||L/C, T/T, D/P, Western Union, Paypal|
- Model NO.: DLL80-2
- Structure: Hydraulic Jack
- Power Source: Pneumatic
- Certification: CE, ISO 9001:2008
- Air Pressure: 0.8-1.2MPa
- Lift Height: 80t 110mm; 50t 210mm
- Rated Pressure: 31.2MPa
- Stype: Standard
- Transport Package: Carton Packaging
- Origin: Baoding
- Type: Hydraulic Jack
- Capacity (Load): 80/35t
- Max Height: 210mm
- Condition: New
- Minim Height: 220mm
- Extension Height: 45mm 75mm
- Net Weight: 80kg
- Trademark: LIBANG
- Specification: DLL80-1
- HS Code: 8425421000
80 ton air hydraulic jack / hydraulic jacks with competitive price
This product is a new type of lifting equipment using pressurized gas as the power,combined with hydraulic pressure and telescopic hydro-cylinder,it boasts exquisite design,compacted size,light weight ,easy manipulation,time and labor saving as well as heavy weight lifting capability etc.it is widely used in mobile weight lifting,especially suitable for the repair of transportation vehicles such as motorcars and tractors ,etc.
Features of 90 ton hydraulic jacks(DLL80-1)
1.for load lifting activities
3.high quality with most competitive.
4. Compact design ,small volume,light weight,easy operation,time saving,labor saving,large lifting tonnage.
5. Small dimension,large carrying capacity,high-pressure resistance performance.
6. Slightly slide switch for ealizing purpose lifting.
7.It is widely used in mobile weight lifting,especially suitable for the repair of transportation vehicles such as motorcars and tractors ,etc.
Features of Product
There are many disadvantages with ordinary hand jack,while this type of jack will overcome the disavantages of ordinary hand jack fundamentally.
The babor intensity needed is just to push jack to suitable working location.and slightly slide switch for realizing purpose of lifting.
Whan general transport vehicle carry cargo of 120 tons,only about 2 minutes are needed for lifting wheel to suiable height.
There is no necessity for workers to climb underside of vehicle to carry out lifting work ,which can be realized throgh controlling switch from outside of vehicle body,thereby avoid adnger for the personnel.
Vehicle repairing itself is a kind of messy job.This product will get rid of messy phenomena of dust and mud all over the body while working in wind ,rain and snow etc.
This product has good durability;its lifting ability is 20 Times more than that of ordinary jack.This company provide life time maintenance for the product ,and three Guarantees(for repair,replacement or compensation of faulty products)services are provided timely,thereby reduce your repair costs.
Methods of operation
1. The holding rod to 90 degrees when don't use and save the area.
2. Holding rod to 45 degrees when moving jack, the staff can push and pull the jack.
3. when the position of the alignment will be adjusted to the horizontal direction, can be around to adjust the position of the jack.
4.Connect the gas source at the time of lifting.Pump in more than 0.6 cubic meters, the diameter should be more than 8mm.
5. Holding the knife rod, can adjust the grip angle.
6. according to the need to adjust the switch on the three stalls.
7. each use should be extended to the extension height, so as to avoid the car body and cylinder direct contact with the oil cylinder damage.
8.Aviation hydraulic oil should be marked at the filling port. The amount of oil when the jack flat and the filling port is the standard.